Loading Trucks and Shelves

Bulletin WI-513


WALK-IN-OVEN
ADDITIONAL EQUIPMENT

Specifications

Oven Work space (WxDxH)

Shelf Truck

Flat Bed Truck

Truck Shelf Dimensions

Max Shelves*

Truck

Shelves

Flat Bed dimensions

Truck Capacity

Model

Capacity

Model

Capacity

Model

48"x48"x72"

42"W x 42"D

10

1000Ibs

2000 Ibs

ST446L

ST446H

150Ibs

250 Ibs

S44L

S44H

42"W x 42"D

2500Ibs

FB44

60"x72"x72"

54"W x 66"D

10

1000Ibs

2000 Ibs

ST566L

ST566H

150Ibs

250 Ibs

S56L

S56H

54"W x 66"D

3000Ibs

FB56

60"x96"x72"

54"W x 90"D

10

1500Ibs

2500Ibs

ST586L

ST586H

200Ibs

300Ibs

S58L

S58H

54"W x 90"D

3500Ibs

FB58

72"x72"x78"

66"W x 66"D

11

1500Ibs

2500Ibs

ST666L

ST666H

200Ibs

300Ibs

S66L

S66H

66"W x 66"D

3500Ibs

FB66

72"x96"x78"

66"W x 45"D

22

2000Ibs

3000Ibs

ST686L

ST686H

125Ibs

200Ibs

S68L

S68H

66"W x 90"D

4000Ibs

FB68

72"x120"x78"

66"W x 57"D

22

2500Ibs

4000Ibs

ST6106L

ST6106H

150Ibs

250Ibs

S610L

S610H

66"W x 114"D

5000Ibs

FB610

72"x114"x72"

66"W x 69"D

22

3000Ibs

4500Ibs

ST6126L

ST6126H

200Ibs

300Ibs

S612L

S612H

66"W x 138"D

6000Ibs

FB612

72"x96"x96"

66"W x 45"D

28

2500Ibs

3500Ibs

ST688L

ST688H

125Ibs

200Ibs

S68L

S68H

66"W x 90"D

4000Ibs

FB68

INSULATED FLOOR AND TRUCK TRACKS

Standard Walk-In Ovens include a steel plate floor and provisions for a custom installed insulated floor. Floor plate is " thick in ovens up to 72" wide x 120" long; thick on wider models. A doorsill at the front edge of the floor plate maintains doorway rigidity and provides sealing surface for the oven doors. The doorsill is 2" high on 2750C and 3500C ovens; 3" high 4000C ovens.

At no charge, the doorsill can be eliminated, door lengthened and equipped with drag seals. This arrangement provides a floor level entrance to allow loading by hand truck, fork lift truck or by loading equipment to varying wheel spacing.

When loading with an over truck, installation of truck wheel guide is recommended. This allows the doorsill to remain across the work space opning. Floor level truck wheel guide track openings beneath the doors.

Truck wheel guide track width and centerlines may be specified to suit existing equipment or to be used with a loading track from the front of this bulletin. Guide tracks are generally wider than track wheel width. If not specified, tracks are provided 2 wide on centerlines 12" less than work space width.

  • Truck Tracks to allow loading at factory floor truck loading limited to distributed floor loading of 100 Ibs per square foot level, flared at the front for easy entrance of wheels, includes truck track seals on door to close off track opening ..........................TT
  • Insulated Floor with Recessed Truck Tracks provides reduced heat loss and improved temperature uniformity of insulated floor plus allows loading at factory floor level.......................................................................................................................IFRTT
  • Insulated Floor with steel plate over, 2" for 2750C and 3500C, 3" at 4000C, minimizes heat loss and improves temperature uniformity near floor level, rated at 100 Ibs per square foot distributed loading..........................................................................IF
  • Insulated Floor with Surface Truck Tracks use where oven will be recessed into the factory floor or loading with an extended ramp, includes drag seals on the oven door. Total........................................................................................................................IFSTT

ADDITIONAL EQUIPMENT AVAILABLE

  • Programmable Temperature Controller, microprocessor based, digital indicating, thermocouple actuated, in lieu of standard controller......................................................................................................PTC3
  • Recording Thermometer, thermocouple actuated, 24-hour, 10" diameter circular chart used in conjunction with standard controller..........................................................................................................RT
  • Programmable Recording Temperature Controller, microprocessor based thermocouple actuated, digital display, 24-hour, 10" diameter circular chart, in lieu of standard controller..........................................................................................................PRTC3
  • Digital Timing System, incorporated into standard temperature controller, 99 hour 59 minute range, starts timing when temperature reaches set point and shuts down oven at end of set time ..............................................................................DTS3
  • Shut Down Timer, with continuous "hold" feature, 1,5,10 or 30 hour range............................................................................SDT
  • Batch Timer, for uniformly timing batch operations, Continuous alarm with door interlock, alarms at end of preset time period untill door is opened or time reset. 1, 5, 10 or 30 hour range....................................................................................................BT
  • Automatic Door Switch, turns off blower and heat when door is opened. Restores blower and heat on electric models, blower only on gas models, when door is closed................................................................................................................ADS
  • Powered Forced Exhauster
Capacity HP Outlet Diameter Height
325 CFM 1/3 6" 23"
650 CFM 1/2 6" 23"
975 CFM 1 8" 23"
Send Enquiry

Designed & Hosted by : MID Promoted by : GID